header
welcome to our website! My Site  |  My Products  |  English / 中文版
banner_inside
Current position:HOME>>NEWS>>Company News>>Induction motor maintenance method
NEWS
Induction motor maintenance method(Hits:) 
Origin Author Add Time2017-04-08
fontSize: T|T
Daily maintenance - after each operation
1 wash the hose and filter into the cleaning agent to remove any residue from the detergent to help prevent corrosion.
2 turn off the water supply system connected to the high pressure cleaning machine.
3 pull the trigger on the servo gun lever to release all the pressure in the hose.
4 remove the rubber hoses and hoses from the high-pressure washer.
5 cut off the connecting wire of the spark plug to ensure that the engine will not start.
Electric type:
Turn the power switch to the "on" and "off" positions four to five times, each time 1-3 seconds to clear the water from the pump. This step will help protect the pump from damage.
Engine type:
Slowly pull the engine's starting rope 5 times to remove the water from the pump. This step will help protect the pump from damage.
Regular maintenance --- once every 2 months
1 periodically removing fuel from the tank will prolong the life and performance of the engine. The precipitate of fuel can cause damage to the fuel pipe, fuel filter and carburetor.
2 when not in use of high pressure cleaning machine with kaichi pump protection suite (9.558-998.0) to protect your high pressure cleaning machine. Pump protection suite is specially used to protect high pressure cleaning machine to prevent corrosion, premature wear and freezing, etc.. And the valve and seal to be coated with lubricant to prevent them stuck.
Electric type:
1 turn off the high pressure cleaning machine.
2 disconnect the high-pressure hose and the servo gun rod from the pump.
3 connect the valve to the pump and open the valve.
4 start the cleaning machine; put all the materials in the tank into the pump.
5 close the cleaning machine; high pressure cleaning machine can be stored directly.
Engine type:
1 turn off the high pressure cleaning machine.
2 disconnect the high-pressure hose and the servo gun rod from the pump.
3 connect the valve to the pump and open the valve.
4 ignition, pull start rope; all substances in the tank into the pump.
5 high pressure cleaning machine can be stored directly.
keyworks:

footer

Contact Us

Mobile Site

Message